International Journal of Scientific and Research Publications

IJSRP, Volume 3, Issue 9, September 2013 Edition [ISSN 2250-3153]


Proposal for the Development of a Device to Load Bagasse at Sugar Industry
      Santosh Kunnur, S. N. Kurbet, M M Ganganallimath
Abstract: In all sugar industries the cane after processing is left with the waste product called Bagasse. The Bagasse produced in the mills is used as a fuel to boilers and the generation of steam. The steam thus produced is expanded in turbines and the power is generated. The excess bagasse is then stored in an open area. Lot of human health hazards is taking place due to loading of bagasse. Nowadays, the industries are using the crane systems to load the bagasse into the tippers, which is a very slow task and causing more dust. The bucket conveyors are used to move bulk materials in a vertical or inclined path. Buckets are attached to a cable, chain, or belt. Buckets are automatically unloaded at the end of the conveyor run.

Reference this Research Paper (copy & paste below code):

Santosh Kunnur, S. N. Kurbet, M M Ganganallimath (2018); Proposal for the Development of a Device to Load Bagasse at Sugar Industry; Int J Sci Res Publ 3(9) (ISSN: 2250-3153). http://www.ijsrp.org/research-paper-0913.php?rp=P211791
©️ Copyright 2011-2022 IJSRP - All rights reserved. Use of this web site signifies your agreement to the terms and conditions.